DMP Waste Water Treatment Systems and Parts

If you operate a DMP waste water treatment system, keeping it running efficiently is critical for regulatory compliance, production uptime, and minimizing operating costs. Over time, wear-and-tear components such as pumps, pH probes, filter press cloths, and mixers require replacement. In many cases, upgrading individual components—or even replacing entire subsystems—can significantly improve performance.

Met-Chem, based in Cleveland, Ohio and manufacturing wastewater treatment equipment since 1956, provides complete replacement parts, upgrades, and new equipment for DMP waste water treatment systems. Whether you need a single replacement pH probe or a complete filter press or clarifier upgrade, Met-Chem can supply high-quality components engineered for industrial wastewater treatment.

A DMP waste water treatment system is typically used in industrial applications such as:

• Metal finishing and plating
   
• Manufacturing and machining
   
• Chemical processing
   
• Industrial cleaning operations
   
• Surface finishing and coating facilities
   

These systems are designed to remove contaminants such as:

• Heavy metals (nickel, chrome, zinc, copper)
   
• Suspended solids
   
• Oils and greases
   
• Chemical contaminants
   
• Sludge-forming precipitates
   

A typical DMP wastewater treatment system includes:

• Reaction tanks for chemical treatment
   
• Mixers for chemical blending
   
• pH probes for process control
   
• Level sensors for automation
   
• Air operated diaphragm pumps for sludge transfer
   
• Filter press for sludge dewatering
   
• Clarifier or settling equipment
   

Each of these components must operate correctly for the system to perform efficiently.

Met-Chem supplies all major replacement parts and upgrades for DMP wastewater treatment systems, including both mechanical and process components.

Met-Chem can supply:

• Polypropylene tanks
   
• Cone bottom tanks
   
• Flat bottom tanks
   
• Reaction tanks
   
• Sludge holding tanks
   

Cone bottom tanks are especially beneficial for sludge removal, allowing solids to settle and discharge efficiently.

Mixers are essential for:

• Chemical blending
   
• pH adjustment
   
• Coagulation and flocculation
   

Met-Chem supplies replacement mixers compatible with DMP systems, including gear-driven and direct-drive mixers.

Air operated diaphragm pumps are commonly used in DMP systems for:

• Sludge transfer
   
• Chemical transfer
   
• Filter press feeding
   

Met-Chem provides replacement AODD pumps sized correctly for your application.

Process control components include:

• Replacement pH probes
   
• Level sensors
   
• Float switches
   
• Continuous level transmitters
   

These components ensure proper chemical dosing and system automation.

The filter press is one of the most critical components in any DMP wastewater treatment system.

Met-Chem supplies:

• Filter press cloths
   
• Filter press plates
   
• Complete new filter presses
   
• Hydraulic systems
   
• Feed pumps
   

New filter press cloths and plates can dramatically improve dewatering performance and reduce moisture content in sludge cake.

Lamella clarifiers improve settling efficiency and reduce system footprint.

Met-Chem provides:

• Replacement lamella plate packs
   
• Complete lamella clarifiers
   
• Clarifier upgrades for DMP systems
   

These systems improve solids separation and reduce loading on downstream filtration equipment.

Met-Chem supplies chemical feed equipment including:

• Chemical metering pumps
   
• Polymer dosing pumps
   
• Acid and caustic dosing systems
   
• Chemical feed skids
   

Proper chemical dosing ensures efficient precipitation and treatment.

After filter press dewatering, sludge dryers can:

• Reduce sludge weight by up to 90%
   
• Lower disposal costs
   
• Improve handling and transport
   

Met-Chem manufactures sludge dryers designed to integrate with existing DMP wastewater treatment systems.

Met-Chem provides several advantages:

Complete Replacement Capability

• Tanks
   
• Pumps
   
• Sensors
   
• Filter presses
   
• Clarifiers
   
• Sludge dryers
   

OEM and Upgrade Options

• Direct replacement parts
   
• Performance upgrades
   
• Full system replacements
   

Made in the USA

• Manufactured in Cleveland, Ohio
   
• High quality industrial construction
   

Fast Lead Times

• Many parts in stock
   
• Quick manufacturing for custom components
   

Common signs include:

• Poor sludge dewatering
   
• Slow treatment cycles
   
• Incorrect pH readings
   
• Pump failures
   
• Excess sludge carryover
   
• Clarifier solids escaping
   

Replacing worn components restores system performance and compliance.

In addition to replacement parts, Met-Chem can provide:

• Complete new filter presses
   
• Replacement clarifiers
   
• New tanks and mixers
   
• Complete wastewater treatment system upgrades
   
• Full replacement DMP wastewater treatment systems
   

Met-Chem can also modernize older DMP systems with improved automation and performance.

Met-Chem has over 65 years of experience manufacturing industrial wastewater treatment equipment. Their team understands how DMP systems operate and can provide direct replacement parts as well as improved upgrade options.

From filter press cloths and plates to lamella clarifier plate packs, tanks, mixers, pumps, and sludge dryers, Met-Chem provides everything needed to maintain, repair, or upgrade your DMP waste water treatment system.

If your DMP wastewater treatment system needs replacement parts, upgrades, or a complete system replacement, Met-Chem can help.

Their expertise ensures your system operates efficiently, reliably, and in compliance with environmental regulations.